Error number: ERR_0000
Error type: INFO
Recorder is ready for operating
--
--
--
--
--
-----------------------------------------
Error number: ERR_0001
Error type: ERROR
Internal error
An error occurred in the program sequence
--
Note down the error number and inform the service department
Check the modification notes of the current software and
hardware
--
-----------------------------------------
Error number: ERR_0002
Error type: ERROR
Internal error
An error occurred in the program sequence
--
Note down the error number and inform the service department
Check the modification notes of the current software and
hardware
--
-----------------------------------------
Error number: ERR_0003
Error type: ERROR
System error occurred
FPGA file not loaded
Reset FPGA not possible, file not loaded
Note down the error number and inform the service department
Check the static parameter set for Use_Fpga parameters
--
-----------------------------------------
Error number: ERR_0004
Error type: ERROR
System error occurred
FPGA file not loaded
Memory allocation at FPGA load failed
Note down the error number and inform the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0005
Error type: ERROR
System error occurred
FPGA file not loaded
File open at FPGA download failed
Note down the error number and inform the service department
Check the file box of the firmware pack and check the static
parameters, FPGA file names
To see more details activate Error Log file
-----------------------------------------
Error number: ERR_0006
Error type: ERROR
System error occurred
FPGA file not loaded
File read error (length error)
Note down the error number and inform the service department
Check the file box of the firmware pack and check the static
parameters, FPGA file names
Possibly wrong FPGA version
-----------------------------------------
Error number: ERR_0007
Error type: ERROR
Internal error
Operating system error
Task operation error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
Task spawn/delete error. To see more details activate error log
file
-----------------------------------------
Error number: ERR_0008
Error type: ERROR
Internal error
Operating system error
Queue operation error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
Queue create/delete error. To see more details activate error
log file
-----------------------------------------
Error number: ERR_0009
Error type: ERROR
Internal error
Operating system error
Semphore operation error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
Semaphore create/delete error. To see more details activate
error log file
-----------------------------------------
Error number: ERR_0010
Error type: ERROR
Internal error
Internal communication error
Semaphore take/give failled
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
Semaphore take/give error. To see more details activate error
log file
-----------------------------------------
Error number: ERR_0011
Error type: ERROR
Internal error
Internal communication error
Queue operation error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
Queue message send / receive error. To see more details
activate error log file
-----------------------------------------
Error number: ERR_0012
Error type: ERROR
Internal error
Internal communication error
Intertask communication format error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
Queue message format error. To see more details activate
error log file
-----------------------------------------
Error number: ERR_0013
Error type: ERROR
Internal error
Operating system error
OS Object creation failed
Note down the error number and inform the service department
Note down the error number and inform the R&D department
taskSpawn or msgQCreate or intConnect failed
-----------------------------------------
Error number: ERR_0014
Error type: ERROR
An error occurred in the mirror motor unit
The time monitor reports timeout during the sp in-up phase of
the mirror motor
--
The recorder hardware is defective. Note down the error
number and inform the service department
Check the mirror motor unit
--
-----------------------------------------
Error number: ERR_0015
Error type: ERROR
An error occurred in the mirror motor unit
The time monitor reports timeout during the spin-down phase of
the mirror motor
--
The recorder hardware is defective. Note down the error
number and inform the service department
Check the mirror motor unit
--
-----------------------------------------
Error number: ERR_0016
Error type: CRITICAL ERROR
An error occurred in the air supply unit
The air safety switch is not closed
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the air supply unit
--
-----------------------------------------
Error number: ERR_0017
Error type: ERROR
An error occurred in the air supply unit
The mirror air cooler temperature is to high
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the air supply unit
--
-----------------------------------------
Error number: ERR_0018
Error type: CRITICAL ERROR
Internal communication error
Communication error on the I2C-Bus
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check connections between P2C2-board and external boards
--
-----------------------------------------
Error number: ERR_0019
Error type: CRITICAL ERROR
An error occurred in the air supply unit
The air pump did not start
TimeOut while reading vacuum pump sensor on fpga-port.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the air supply unit
--
-----------------------------------------
Error number: ERR_0020
Error type: ERROR
An error occurred in the optic unit
The focus stepping motor cannot find the zero position
--
The recorder hardware is defective. Note down the error
number and inform the service department
Check the optic head and focus motor parameters
--
-----------------------------------------
Error number: ERR_0021
Error type: ERROR
An error occurred in the optic unit
The focus stepping motor cannot leave the zero position
--
The recorder hardware is defective. Note down the error
number and inform the service department
Check the optic head and focus motor parameters
--
-----------------------------------------
Error number: ERR_0022
Error type: ERROR
A parameter set-up error occurred in the optic unit
The focus position set point is not within the permissible range
--
Note down the error number and inform the service department
Check the focus parameter PID[xxxx]
--
-----------------------------------------
Error number: ERR_0023
Error type: ERROR
An error occurred in the optic unit
The filter stepping motor cannot find the zero position
--
Note down the error number and inform the service department
Check the optic head and filter motor parameters
--
-----------------------------------------
Error number: ERR_0024
Error type: ERROR
An error occurred in the optic unit
The filter stepping motor cannot leave the zero position
--
The recorder hardware is defective. Note down the error
number and inform the service department
Check the optic head and filter motor parameters
--
-----------------------------------------
Error number: ERR_0025
Error type: ERROR
A parameter set-up error occurred in the optic unit
The filter number is not within the permissible range
--
Note down the error number and inform the service department
Check the filter parameters
--
-----------------------------------------
Error number: ERR_0026
Error type: ERROR
A parameter set-up erro r occurred in the optic unit
The number of the shaping element is not within the
permissible range
--
Note down the error number and inform the service department
Check the shaping element parameters
--
-----------------------------------------
Error number: ERR_0027
Error type: ERROR
An error occurred in the optic unit
The adjust bias current of the laser diode is higher than the
maximum current
--
Note down the error number and inform the service department
The maximum diode current in the static parameters is too low,
or the laser diode is defective. Check the laser diode
--
-----------------------------------------
Error number: ERR_0028
Error type: ERROR
An error occurred in the optic unit
The maximum bias current of the laser diode is not sufficient to
achieve the required light value
--
Note down the error number and inform the service department
The laser diode is defective. Check the laser diode
--
-----------------------------------------
Error number: ERR_0029
Error type: ERROR
An error occurred in the optic unit
The adjusted current of the laser diode is higher than the
maximum current
--
Note down the error number and inform the service department
The maximum diode current in the static parameters is too low,
or the laser diode is defective. Check the laser diode
--
-----------------------------------------
Error number: ERR_0030
Error type: ERROR
A parameter set-up error occurred in the optic unit
The modulation current of the laser diode set to maximum is
not sufficient to achieve the required light value
--
Note down the error number and inform the service department
The laser diode is defective. Check the laser diode
--
-----------------------------------------
Error number: ERR_0031
Error type: ERROR
An error occurred in the optic unit
The laser diode must be on for the light stabilization
--
Note down the error number and inform the service department
Report the error number to the development department
--
-----------------------------------------
Error number: ERR_0032
Error type: ERROR
An error occurred in the optic unit
The light stabilization must be off
--
Note down the error number and inform the service department
Report the error number to the development department
--
-----------------------------------------
Error number: ERR_0033
Error type: ERROR
An error occurred in the optic unit
Passed value is to high for this function
--
Note down the error number and inform the service department
Report the error number to the development department
--
-----------------------------------------
Error number: ERR_0034
Error type: ERROR
An error occurred in the optic unit
Passed value is to low for this function
--
Note down the error number and inform the service department
Report the error number to the development department
--
-----------------------------------------
Error number: ERR_0035
Error type: ERROR
An error occurred in a database
The specified record is not available
--
Note down the error number and inform the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0036
Error type: ERROR
An error occurred in a database
The specified error got a different type
--
Note down the error number and inform the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0037
Error type: ERROR
An error occurred in a database
The length of the value of the specified error is to long for the
delivered buffer
--
Note down the error number and inform the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0038
Error type: ERROR
An error occurred in a database
The length of the buffer of the specified record is to short for
the delivered value
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0039
Error type: ERROR
An error occurred in a database
The access to a database is not possible
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0040
Error type: ERROR
An error occurred in a database
The insertion of a recored into a database is not possible
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0041
Error type: ERROR
An error occurred in the file system
A file could not be opened
The function "fopen" returned with error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0042
Error type: ERROR
An error occurred in the file system
A file could not be closed
The function "fclose" returned with error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0043
Error type: ERROR
An error occurred in the file system
A file could not be seeked
The function "fseek" returned with error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0044
Error type: ERROR
An error occurred in the file system
A file could not be written
The function "fwrite" returned with error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0045
Error type: ERROR
An error occurred in the file system
A file could not be written
The function "fread" returned with error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0046
Error type: ERROR
An error occurred in the file system
The position of a file could not be asked
The function "ftell" returned with error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
---------------------------- -------------
Error number: ERR_0047
Error type: ERROR
An error occurred in the file system
A file could not be written
The function "fgetc" returned with error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0048
Error type: ERROR
An error occurred while allocating memory
Memory could not be allocated
The function "new" returned with a null pointer
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0049
Error type: ERROR
An error occurred while parsing a source
A syntax error is occurred
A parser detected a syntax error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0050
Error type: CRITICAL ERROR
On board device error
Unable to set mirror power supply (36 V)
Unable to set resolution dependend voltage for mirror on
MASC-Board (35 -38 V)
Note down the error number and inform the service department
Check the power supply (36 V)
--
-----------------------------------------
Error number: ERR_0051
Error type: ERROR
An error occurred in the slow scan unit
The stepper board signals a short circuit
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the safety loop and the power supply (36V)
--
-----------------------------------------
Error number: ERR_0052
Error type: ERROR
An error occurred in the slow scan unit
The stepper board signals high temperatur
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the safety loop and the power supply (36V)
--
-----------------------------------------
Error number: ERR_0053
Error type: ERROR
An error occurred in the slow scan unit
The stepper board signals not ready
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the safety loop and the power supply (36V)
--
-----------------------------------------
Error number: ERR_0054
Error type: ERROR
An error occurred in the slow scan unit
The carrier reaches the left limit
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0055
Error type: ERROR
An error occurred in the slow scan unit
The carrier reaches the right limit
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0056
Error type: ERROR
An error occurred in the slow scan unit
The carrier is moving when it not allowed to
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0057
Error type: ERROR
An error occurred in the slow scan unit
The safety loop is not closed
--
Check all open cases and close them
Check the safety loop and the power supply (24V)
--
-----------------------------------------
Error number: ERR_0058
Error type: ERROR
An error occurred in the slow scan unit
An interrupt has occurred when not expected. Interrupt: Stop
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0059
Error type: ERROR
An error occurred in the slow scan unit
An interrupt has occurred when not expected. Interrupt: Signal
of lightbarrier has changed
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0060
Error type: ERROR
An error occurred in the slow scan unit
An interrupt has occurred when not expected. Interrupt:
Destination reached
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0061
Error type: ERROR
An error occurred in the slow scan unit
A timeout is occurred
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the slow scan mechanik
--
-----------------------------------------
Error number: ERR_0062
Error type: ERROR
An error occurred in the slow scan unit
A valid ramp could not be found
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0063
Error type: ERROR
An error occurred in the slow scan unit
A ramp which fits into a specified distance could not be found
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0064
Error type: ERROR
A parameter error occurred
The value of a parameter is not valid
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0065
Error type: CRITICAL ERROR
A critical error occurred at material transport
Exit switch is not free at material transport. Possibly material
crash in the material output unit.
--
Remove output device (takeup cassette or olp bridge) from
recorder, remove material from output unit and execute error
correction.
Check the exit switch in the output unit.
--
-----------------------------------------
Error number: ERR_0066
Error type: CRITICAL ERROR
A critical error occurred at material transport
Exit switch is not free after material transport. Possibly material
crash in the material output unit.
--
Remove output device (takeup cassette or olp bridge) from
recorder, remove material from output unit and execute error
correction.
Check the exit switch in the output unit.
--
-----------------------------------------
Error number: ERR_0067
Error type: CRITICAL ERROR
A critical error occurred at material transport
Exit switch not reached with material. Possibly material crash in
the material output unit.
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check the exit switch in the output unit.
--
-----------------------------------------
Error number: ERR_0068
Error type: CRITICAL ERROR
A critical error occurred at material transport
Material encoder reports transport disruption.
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check the supply cassette, output unit, output device, material
encoder and masc board.
--
-----------------------------------------
Error number: ERR_0069
Error type: ERROR
An internal hardware error occurred.
Encoder read error at material transport (dynamic)
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check the encoder and MASC-Board.
--
-----------------------------------------
Error number: ERR_0070
Error type: ERROR
An internal hardware error occurred.
Encoder set error. The set and get values of encoder are not
the same (static).
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check the encoder and MASC-Board.
--
-----------------------------------------
Error number: ERR_0071
Error type: ERROR
Takeup cassette not empty or not revinded.
Takeup cassette not empty or not revinded.
--
Empty or revind takeup cassette and execute error correction.
Empty or revind takeup cassette and execute error correction.
--
-----------------------------------------
Error number: ERR_0072
Error type: ERROR
Takeup cassette full.
Takeup cassette full.
--
Put the takeup cassette to the offline developer and try again.
Put the takeup cassette to the offline developer and try again.
--
-----------------------------------------
Error number: ERR_0073
Error type: ERROR
Takeup cassette not inserted.
Takeup cassette not inserted or not detected.
--
Put an empty takeup cassette into recorder and try again.
Check the takeup cassette and cassette hardware interface on
the recoder side.
--
-----------------------------------------
Error number: ERR_0074
Error type: CRITICAL ERROR
A critical error occurred at material transport
Timeout at material transport forward. No Intr from encoder.
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check the encoder and MASC-Board.
--
-----------------------------------------
Error number: ERR_0075
Error type: CRITICAL ERROR
A critical error occurred at material transport
Timeout at material transport backward.
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check the encoder and MASC-Board.
--
-----------------------------------------
Error number: ERR_0076
Error type: ERROR
Online developer not ready
Online developer not ready.
--
Check the online developer.
Check the hardware interface to online developer.
--
-----------------------------------------
Error number: ERR_0077
Error type: ERROR
An error occurred at material transport.
Communication to external device (Supply/Takeup-Cass)
broken.
--
Check the supply cassette and takeup cassette or online
developer.
Check hardware interfaces to external material devices.
--
-----------------------------------------
Error number: ERR_0078
Error type: ERROR
An internal software error occurred.
An attempt to read an uninitialized ADC device.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and notifiy the R&D department.
Read Adc device without first level init
-----------------------------------------
Error number: ERR_0079
Error type: ERROR
An error occurred at material transport.
Communication to external device (Supply/Takeup-Cass)
broken.
--
Check the supply cassette and takeup cassette or online
developer.
Check hardware interfaces to external material devices.
Device not idle at send app data.
-----------------------------------------
Error number: ERR_0080
Error type: ERROR
An error occurred at material transport.
Communication to external device (Supply/Takeup-Cass)
broken.
--
Check the supply cassette and takeup cassette or online
developer.
Note down the error number and notifiy the R&D department.
Device not idle at init SCASS
-----------------------------------------
Error number: ERR_0081
Error type: ERROR
An error occurred at material transport.
Communication error beetween recorder and external output
device.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and notifiy the R&D department.
Response fro m wrong task.
-----------------------------------------
Error number: ERR_0082
Error type: ERROR
An error occurred at material transport.
Communication error beetween recorder and external output
device.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and notifiy the R&D department.
Response with wrong event.
-----------------------------------------
Error number: ERR_0083
Error type: ERROR
An error occurred at material transport.
Communication error beetween recorder and external output
device.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and notifiy the R&D department.
Response from wrong task.
-----------------------------------------
Error number: ERR_0084
Error type: ERROR
An error occurred at material transport.
Communication error beetween recorder and external output
device.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and notifiy the R&D department.
Response with wrong event.
-----------------------------------------
Error number: ERR_0085
Error type: ERROR
An error occurred at material transport.
Communication error beetween recorder and external output
device.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and notifiy the R&D department.
Device not Idle at init TCASS
-----------------------------------------
Error number: ERR_0086
Error type: ERROR
An error occurred at material transport.
Communication error beetween recorder and external output
device.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and notifiy the R&D department.
Device not idle at send data to TCASS
-----------------------------------------
Error number: ERR_0087
Error type: ERROR
An error occurred at material transport.
Communication error beetween recorder and external output
device.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and notifiy the R&D department.
Device not idle at init OLP
-----------------------------------------
Error number: ERR_0088
Error type: ERROR
An error occurred while material handling.
Timeout at build vacuum.
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check the vacuum pumps, vacuum sensor, vacuum hoses
and/or MASC Board.
--
-----------------------------------------
Error number: ERR_0089
Error type: ERROR
An error occurred while material handling.
Timeout at vacuum off.
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check the vacuum pump and MASC Board.
--
-----------------------------------------
Error number: ERR_0090
Error type: ERROR
An internal hardware error occurred.
Cut unit hardware is defect.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Cut unit sensors says: BOTH sensors ON. Hardware is
defective. Check cut unit and MASC Board.
--
-----------------------------------------
Error number: ERR_0091
Error type: ERROR
An error occurred while material handling.
Timeout at cut action. Cut switch not reached.
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check cut unit (motor and sensors) and MASC Board.
--
-----------------------------------------
Error number: ERR_0092
Error type: ERROR
An error occurred while material handling.
Cutter don't leave start position at cut action.
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check cut unit (motor and sensors) and MASC Board.
--
-----------------------------------------
Error number: ERR_0093
Error type: ERROR
An error occurred while material handling.
Cutter don't reach side position at cut action.
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check cut unit (motor and sensors) and MASC Board.
--
-----------------------------------------
Error number: ERR_0094
Error type: ERROR
Internal system error
Error using operating system function
Error spawning task
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0095
Error type: ERROR
Internal system error
Error using operating system function
Error deleting task
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0096
Error type: ERROR
Internal system error
Error using operating system function
Error allocating memory
Switch off the recorder and restart it. If the error still occurs,
note down the error num ber and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
check comment text if available
-----------------------------------------
Error number: ERR_0097
Error type: ERROR
Internal system error
Error using operating system function
Error freeing memory
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0098
Error type: ERROR
Internal system error
Error using operating system function
Error creating memory partition
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0099
Error type: ERROR
Internal system error
Error in file operation
unexpected end of file
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0100
Error type: ERROR
Internal system error
Error in file operation
file error indicator is set
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0101
Error type: ERROR
Internal system error
Error in file operation
file status error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0102
Error type: ERROR
Internal system error
Error in file operation
Error getting file number
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0103
Error type: ERROR
Internal system error
Error in file operation
Error opening file
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0104
Error type: ERROR
Internal system error
Error in file operation
Error closing file
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0105
Error type: ERROR
Internal system error
Error in file operation
Error flushing file
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0106
Error type: ERROR
Internal system error
Error in file operation
Error getting file position indicator
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0107
Error type: ERROR
Internal system error
Error in file operation
Error setting file position indicator
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0108
Error type: ERROR
Internal system error
Error in file operation
Error removing file
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0109
Error type: ERROR
Internal system error
Error in file operation
Error changing directory
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0110
Error type: ERROR
Internal system error
Error in file operation
Error making directory
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0111
Error type: ERROR
Internal system error
Error in file operation
Error while printing to file with variable argument list
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0112
Error type: ERROR
Internal system error
Error using operating system function
Error creating semaphore
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--

-----------------------------------------
Error number: ERR_0113
Error type: ERROR
Internal system error
Error using operating system function
Error deleting semaphore
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0114
Error type: ERROR
Internal system error
Error using operating system function
Error taking semaphore
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0115
Error type: ERROR
Internal system error
Error using operating system function
Error giving semaphore
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0116
Error type: ERROR
Internal system error
Error using operating system function
Error creating message queue
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0117
Error type: ERROR
Internal system error
Error using operating system function
Error deleting message queue
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0118
Error type: ERROR
Internal system error
Error using operating system function
Error sending to message queue
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0119
Error type: ERROR
Internal system error
Error using operating system function
Error receiving from message queue
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0120
Error type: ERROR
Internal system error
Error using operating system function
Error creating pipe
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0121
Error type: ERROR
Internal system error
Error using operating system function
Error creating ring buffer
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0122
Error type: ERROR
Internal system error
Error using operating system function
Error deleting ring buffer
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0123
Error type: ERROR
Internal system error
Error using operating system function
Error putting to ring buffer
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0124
Error type: ERROR
Internal system error
Error using operating system function
Error getting from ring buffer
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0125
Error type: ERROR
Internal system error
Error in file operation
Error creating file
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0126
Error type: ERROR
Internal system error
Error in file operation
Error getting file length
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0127
Error type: ERROR
Internal system error
Error in file operation
Error getting file name
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0128
Error type: ERROR
Internal system error
Error in file operation
not enough disk space
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0129
Error type: ERROR
Internal system error
Error in filebox
CRC error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0130
Error type: ERROR
Internal system error
Error in filebox
Error in filebox internal structure
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0131
Error type: ERROR
Internal system error
Error in filebox
Error in filebox date/time
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0132
Error type: ERROR
Internal system error
Error in filebox
target not found
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--
-----------------------------------------
Error number: ERR_0133
Error type: ERROR
Communication error
Speedway communication error
Format error in speedway communication
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0134
Error type: ERROR
Communication error
Speedway communication error
Speedway to Diag time out
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0135
Error type: ERROR
Internal system error
Error using operating system function
TFFS error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
Erase FLASH area for TFFS from service terminal
-----------------------------------------
Error number: ERR_0136
Error type: ERROR
Internal system error
Error using operating system function
Error initializing dos file system
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0137
Error type: ERROR
Internal system error
MASC interrupt system could not be initialized
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the MP2C2 and MASC Boards.
MASC Interrupt system could not be initialized (InitSysIntr)
-----------------------------------------
Error number: ERR_0138
Error type: ERROR
An error occurred at punch init.
Punch not connected or not configured.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the punch unit, punch connector and parameter punch
configuration in static data.
--
-----------------------------------------
Error number: ERR_0139
Error type: ERROR
An error occurred at punch init.
Punch configuration error.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the parameter punch configuration (16). If punch unit are
not mounted on this machine, check punch connector.
--
-----------------------------------------
Error number: ERR_0140
Error type: ERROR
An error occurred at punch action
Punch not connected or not configured.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the punch unit, punch connector and parameter punch
configuration in static data.
--
-----------------------------------------
Error number: ERR_0141
Error type: ERROR
An error occurred at punch action
Punch configuration error.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the parameter punch configuration (16). If punch unit are
not mounted on this machine, check punch connector.
--
-----------------------------------------
Error number: ERR_0142
Error type: ERROR
An error occurred at punch action
Punch configuration error.
Punch action parameter don't match punch configuration.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the punch configuration static parameter and punch
configuration at the rip side.
--
-----------------------------------------
Error number: ERR_0143
Error type: ERROR
An error occurred at punch action
Punch action started from wrong position.
Punch action from position punch close.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check punch unit (motor, wheel and light-switch)
Possibly punch action without init punch.
-----------------------------------------
Error number: ERR_0144
Error type: ERROR
An error occurred at punch action
Timeout at punch action (10s) at leave ls.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check punch unit (motor, wheel and light-switch)
Possibly no interrupt from punch light switch, check the MASC
board.
-----------------------------------------
Error num ber: ERR_0145
Error type: ERROR
An error occurred at punch action
Timeout at punch action (10s) at arrive ls.
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check punch unit (motor, wheel and light-switch)
Possibly no interrupt from punch light switch, check the MASC
board.
-----------------------------------------
Error number: ERR_0146
Error type: ERROR
Internal system error
Internal communication error
Material init first level not allowed jet.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0147
Error type: ERROR
Internal system error
Internal communication error
Material init second level not allowed jet.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0148
Error type: ERROR
Internal system error
Internal communication error
Material error correction not allowed jet.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0149
Error type: ERROR
Internal system error
Internal communication error
Material general prepare not allowed jet.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0150
Error type: ERROR
Internal system error
Internal communication error
Material general finish not allowed jet.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0151
Error type: ERROR
Internal system error
Internal communication error
Material general start not allowed jet.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0152
Error type: ERROR
Internal system error
Internal communication error
Material general stop not allowed jet.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0153
Error type: ERROR
Internal system error
Internal communication error
Material general break not allowed jet.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0154
Error type: ERROR
Internal system error
Internal communication error
Material extended command not allowed jet.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0155
Error type: ERROR
Internal system error
Error using operating system function
Error reading from file
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
------------------------------------- ----
Error number: ERR_0156
Error type: ERROR
Internal system error
Error using operating system function
Error writing to file
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0157
Error type: ERROR
Internal system error
Error using operating system function
Error in task delay
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0158
Error type: ERROR
An error occurred in a database
The erasing of a record out of a database is not possible
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0159
Error type: ERROR
An error occurred in the slow scan unit
The safety loop is not closed
--
Check all open cases and close them
Check the safety loop and the power supply (36V)
--
-----------------------------------------
Error number: ERR_0160
Error type: ERROR
An error occurred in the slow scan unit
The carrier reaches the left limit
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0161
Error type: ERROR
An error occurred in the slow scan unit
The carrier reaches the right limit
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0162
Error type: ERROR
An error occurred in the slow scan unit
The stepper board signals not ready
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the safety loop and the power supply (36V)
--
-----------------------------------------
Error number: ERR_0163
Error type: ERROR
Internal system error
Error in file operation
Error getting st ring from file
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0164
Error type: ERROR
Internal system error
Error in file operation
Error putting sting to file
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0165
Error type: ERROR
An error occurred while setting the light intensity
The BaseIntensity value for the selected resolution of the
current job is lower than the adjustable light
--
The used light intensity is too low. Check the intensity value for
the selected resolution. Perform a FineIntensityTest and repeat
the exposure
Control the BaseIntensity values for all resolutions and the
optic head static parameters. Reboot the system after
parameter changes. If the error still occurs, copy logfile info for
further analysis
--
-----------------------------------------
Error number: ERR_0166
Error type: WAITING
Empty supply cassette. The last sheet of material has not been
cut. It is moved into the output device - online processor or
take -up cassette.
--
--
Plug a refilled supply cassette into the recorder and execute
the error correction function. Empty the takeup cassette at first.
--
--
-----------------------------------------
Error number: ERR_0167
Error type: WAITING
Empty supply cassette. The material rest is too short to
transport it into the output device. The exposed material rest
must be pulled out of the machine from the supply side by
hand.
--
--
Remove the exposed material rest from the supply side by
hand. Plug a refilled supply cassette into the recorder and
execute the error correction function. Empty the takeup
cassette at first.
--
--
-----------------------------------------
Error number: ERR_0168
Error type: ERROR
An error occurred in the slow scan unit
The feed ramp could not be written
--
Note down the error number and inform the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0169
Error type: ERROR
An error occurred in the slow scan unit
Error while calculating feed ramp data
--
Note down the error number and inform the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0170
Error type: ERROR
An internal hardware error occurred.
FPGA busy error
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0171
Error type: ERROR
An internal hardware error occurred.
FPGA detection error
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0172
Error type: ERROR
An internal hardware error occurred.
FPGA initialisation error
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error numbe r: ERR_0173
Error type: ERROR
An internal hardware error occurred.
FPGA busy error
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0174
Error type: ERROR
An internal hardware error occurred.
FPGA frame data error during configuration

LCX16245 IC7 failed or Xilink
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0175
Error type: ERROR
An internal hardware error occurred.
FPGA length count error
LCX16245 IC7 failed or Xilink
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0176
Error type: ERROR
An error occurred at material transport.
Communication error beetween recorder and external input
device
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and notifiy the R&D department.
Response from wrong task.
-----------------------------------------
Error number: ERR_0177
Error type: ERROR
An error occurred at material transport.
Communication error beetween recorder and external input
device
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and notifiy the R&D department.
Response with wrong event.
-----------------------------------------
Error number: ERR_0178
Error type: CRITICAL ERROR
The safety relais could not be closed
The safety relais could not be closed
The safety relais could not be closed
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the safety loop and the power supply (24V)
Check the safety loop and the power supply (24V)
-----------------------------------------
Error number: ERR_0179
Error type: CRITICAL ERROR
The safety power loop is not okay
The safety power loop is not okay
The safety power loop is not okay
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the safety loop and the power supply (24V)
Check the safety loop and the power supply (24V)
-----------------------------------------
Error number: ERR_0180
Error type: CRITICAL ERROR
An error occurred while allocating memory
Error using operating system function
Error creating ring buffer
Note down the error number and inform the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0181
Error type: CRITICAL ERROR
An error occurred in the light control unit
The voltage at the ESD-Relais on one of the FLR-Boards is
below limit.
The voltage at the ESD-Relais on one of the FLR-Boards is
below limit.
Note down the error number and inform the service department
Check the power supply, and cables to the FLR-Board.
Check the power supply, and cables to the FLR-Board.
-----------------------------------------
Error number: ERR_0182
Error type: CRITICAL ERROR
Internal error
Error using operating system function
Error putting to ring buffer
Note down the error number and inform the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0183
Error type: CRITICAL ERROR
Internal error
Error using operating system function
Error getting from ring buffer
Note down the error number and inform the service department
Note down the error number and inform the R&D department
--
-----------------------------------------
Error number: ERR_0184
Error type: ERROR
A Material Crash situation in the output channel occurred. The
EXPOSED material is in the supply cassette!
A Material Crash situation in the output channel occurred. The
EXPOSED material has been moved back into the supply
cassette!
--
Check the output channel. After error correction, load the
material again. Carry out a Material Advance to move the
EXPOSED material sheet into the output device. If the error still
occurs, note down the error and notify the service dep.
Check the output channel for material snippet, the output
switch and the takeup cassette / Online Processor. After error
correction, load the material again. Carry out a Material
Advance to move the EXPOSED material sheet into the output
device.
--
-----------------------------------------
Error number: ERR_0185
Error type: WAITING
Supply Cassette not inserted.
--
--
Plug a refilled supply cassette into the recorder.
--
--
-----------------------------------------
Error number: ERR_0186
Error type: CRITICAL ERROR
On board device error
Unable to reset or initialize parts of the CPU-Core
Unable to reset or initialize parts of the CPU-Core (BRG?s for
example)
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Note down the error number and inform the R&D department
If hardware reset doesnt help, check your software.
-----------------------------------------
Error number: ERR_0187
Error type: CRITICAL ERROR
An error occurred in the AOM unit
HF Feedback on the AOM board is not within limits
HF Feedback on the AOM board is not within limits
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check or replace the AOM board
--
-----------------------------------------
Error number: ERR_0188
Error type: CRITICAL ERROR
Unable to set required laser power
Timeout while trying to set laser power.
Timeout while waiting for MSR to get ready with setting laser
power
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service depart ment
Check Laser Module and Light Sense Board
--
-----------------------------------------
Error number: ERR_0189
Error type: CRITICAL ERROR
Unable to set required laser power
Unable to read expected laser power
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check Laser Module and Light Sense Board
--
-----------------------------------------
Error number: ERR_0190
Error type: ERROR
An internal error occurred in the log file system
System command -fopen- failed
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Remove logfile1.txt from rfa. Reboot the system. If the error
still occurs, copy logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0191
Error type: ERROR
An internal error occurred in the log file system
System command -fopen- failed
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Remove logfile2.txt from rfa. Reboot the system. If the error
still occurs, copy logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0192
Error type: ERROR
An internal error occurred in the log file system
System command -fopen- failed
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Remove logfile3.txt from rfa. Reboot the system. If the error
still occurs, copy logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0193
Error type: ERROR
An internal error occurred in the log file system
System command -fopen- failed
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Remove all logfiles from rfa. Reboot the system. If the error still
occurs, copy logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0194
Error type: ERROR
An internal error occurred in the log file system
System command -fgets- failed
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Remove logfile1.txt from rfa. Reboot the system. If the error
still occurs, copy logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0195
Error type: ERROR
An internal error occurred in the log file system
System command -fgets- failed
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Remove logfile2.txt from rfa. Reboot the system. If the error
still occurs, copy logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0196
Error type: ERROR
An internal error occurred in the log file system
System command -fgets- failed
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Remove logfile3.txt from rfa. Reboot the system. If the error
still occurs, copy logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0197
Error type: ERROR
The supply cassette does not belong to the recorder
The serial number memorized in the supply cassette does not
match with the recorder serial number
--
Insert the supply cassette of the recorder or adapt this supply
cassette to this recorder.
--
--
-----------------------------------------
Error number: ERR_0198
Error type: ERROR
Not calibrated resolution selected
The selected resoltuion is not calibrated. The BaseIntensity
parameter for the selected resolution is zero
--
The intensity value for the selected resolution is not calibrated.
Perform a FineIntensityTest and repeat the exposure
Perform a FineIntensityTest and repeat the exposure. If the
error still occurs, copy logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0199
Error type: ERROR
An communication error to the optic head occurred
The communication to the optic head is broken
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Reboot the system. If the error still occurs, copy logfile info for
further analysis
--
-----------------------------------------
Error number: ERR_0200
Error type: ERROR
An communication error to the optic head occurred
The communication to the optic head is faulty
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Reboot the system. If the error still occurs, copy logfile info for
further analysis
--
-----------------------------------------
Error number: ERR_0201
Error type: ERROR
An error occurred in the optichead unit
The number of gate impulses generated by the MP2C2 is out of
range
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Change the MP2C2 ( 96.317 ) or the optichead or check the
cabling. Reboot the system. If the error still occurs, copy logfile
info for further analysis
--
-----------------------------------------
Error number: ERR_0202
Error type: ERROR
An error occurred in the optichead unit
The temperature of the laser diode did not change after
switching on the temperature regulation
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Change the optichead . Reboot the system. If the error still
occurs, copy logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0203
Error type: ERROR
An error occurred in the optichead unit
The temperature of the laserdiode is over the maximum
allowed temperature
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Change the optichead . Reboot the system. If the error still
occurs, copy logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0204
Error type: ERROR
An error occurred in the optichead unit
A parameter transmitted to the optichead is out of range
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Reboot the system. If the error still occurs, copy logfile info for
further analysis
--
-----------------------------------------
Error number: ERR_0205
Error type: ERROR
An error occurred in the optichead unit
A parameter transmitted to the optichead is out of range
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Reboot the system. If the error still occurs, copy logfile info for
further analysis
--
-----------------------------------------
Error number: ERR_0206
Error type: ERROR
An error occurred in the optichead unit
An error without a defined event has occurred
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Reboot the system. If the error still occurs, copy logfile info for
further analysis
--
-----------------------------------------
Error number: ERR_0207
Error type: ERROR
An error occurred in the optichead unit
The light value on the laserdiode with the bias current alone is
higher than the value in the application data. This may be due
to an error in the primesetter or a not initialized material data
set or an defective optichead
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
If all parameters are correct, change the optichead. Reboot the
system. If the error still occurs, copy logfile info for further
analysis
--
-----------------------------------------
Error number: ERR_0208
Error type: ERROR
An error occurred in the optichead unit
The error occurs if you switch on the temperature regulation on
the optichead without a regulation device
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Check the temperature regulation specific parameters of the
optichead. Reboot the system. If the error still occurs, copy
logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0209
Error type: CRITICAL ERROR
An error occurred in the mirror motor unit
The mirror phased out during transmition. The mirror is not
locked
The mirror phased out during transmition. The mirror is not
locked
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check the mirror motor unit
--
-----------------------------------------
Error number: ERR_0210
Error type: INFO
Empty supply cassette detected! Wait while moving the
material rest
--
--
Wait until the material end operation has finished
--
--
-----------------------------------------
Error number: ERR_0211
Error type: ERROR
An error occurred in the vaccuum unit while material handling
The detect vaccuum is much too low
--
Execute error correction. If the error still occurs, note down the
error number and notify the service department
Check the vaccuum pumps, parameter settings, vaccuum
sensor, vaccuum hoses and/or MASC Board
--
-----------------------------------------
Error number: ERR_0212
Error type: ERROR
An error occurred while selecting the focus value
The RIP transmitted resolution is not a element of the recorder
resolution table
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Check the resolution parameter. If the error still occurs, copy
logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0213
Error type: ERROR
An error occurred in the optic unit
The calculation of the spotshape value failed
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Check the optichead parameter. If the error still occurs, copy
logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0214
Error type: ERROR
An error occurred in the optic unit
The calculation of the filter value failed
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Check the optichead parameter. If the error still occurs, copy
logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0215
Error type: ERROR
An error occurred in the optic unit
The calculation of the physical focus value failed
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Check the optichead parameter. If the error still occurs, copy
logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0216
Error type: ERROR
An error occurred in the optic unit
The calculation of the logical light value failed
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
Check the optichead parameter. If the error still occurs, copy
logfile info for further analysis
--
-----------------------------------------
Error number: ERR_0217
Error type: ERROR
One or both side panels are not closed
The safety loop was briefly interrupted durring an operation
--
Close the side panals and press the error correction key
Check the safety loop switches and the key switch
--
-----------------------------------------
Error number: ERR_0218
Error type: INFO
The supply cassette is almost empty
The remaining material rest is less than a perameter specifity
value (FID STATIC, PID 834) of the maximum capacity
--
The refilling of the supply cassette should be prepared
--
--
-----------------------------------------
Error number: ERR_0219
Error type: WAITING
Recorder exit switch is not free.
Possibly material rest in exit switch.
--
Check recorder output unit and olp bridge or takeup cassette.
Remove material manually.
Check recorder output switch.
--
-----------------------------------------
Error number: ERR_0220
Error type: ERROR
An error occurred in a database
A file which should be copied does not exist
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0221
Error type: ERROR
An error occurred in a database
A file could not be deleted
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0222
Error type: ERROR
An error occurred in a database
A file could not be copied
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0223
Error type: ERROR
An error occurred in a database
A directory could not be created
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0224
Error type: ERROR
An error occurred while parsing a source
A simple syntax error is occured
A parser detected a simple syntax error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0225
Error type: ERROR
An error occurred while parsing a source
A serious syntax error is occured
A parser detected a serious syntax error
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
--
-----------------------------------------
Error number: ERR_0226
Error type: ERROR
An error occurred while setting the light intensity
The BaseIntensity value for the selected resolution of the
current job is lower than the adjustable light
--
The used light intensity is too low. Check the intensity value for
the selected resolution. Perform a FineIntensityTest and repeat
the exposure
Control the BaseIntensity values for all resolutions and the
optic head static parameters. Reboot the system after
parameter changes. If the error still occurs, copy logfile info for
further analysis
--
-----------------------------------------
Error number: ERR_0227
Error type: ERROR
An error occurred while setting the light intensity
The BaseIntensity value for the selected resolution of the
current job is higher than the adjustable light
--
The used light intensity is too high. Check the intensity value
for the selected resolution. Perform a FineIntensityTest and
repeat the exposure
Control the BaseIntensity values for all resolutions and the
optic head static parameters. Reboot the system after
parameter changes. If the error still occurs, copy logfile info for
further analysis
--
-----------------------------------------
Error number: ERR_0228
Error type: ERROR
An error occurred in the optichead unit
The light value on the laserdiode with the modulation current
alone is to high . This may be due to an error in the primesetter
or an defective optichead
--
Reboot the system. If the error still occurs, note down the error
number and inform the service department
If all parameters are correct, change the optichead. Reboot the
system. If the error still occurs, copy logfile info for further
analysis
--
-----------------------------------------
Error number: ERR_0229
Error type: CRITICAL ERROR
An error occurred in the air supply unit
The high-water sensor is still active, after water blow-off.
The high-water sensor is still active, after water blow-off.
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Release Water from the air supply unit, and check water
sensors in this unit.
Release Water from the air supply unit, and check water
sensors in this unit.
-----------------------------------------
Error number: ERR_0230
Error type: CRITICAL ERROR
An error occurred in the air supply unit
The high-water sensor is still active, after water blow-off.
The system checker: the high-water sensor is still active, after
water blow-off 3 times
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Release Water from the air supply unit, and check water
sensors in this unit.
Release Water from the air supply unit, and check water
sensors in this unit.
-----------------------------------------
Error number: ERR_0231
Error type: CRITICAL ERROR
An error occurred in the AOM unit
The temperature in the AOM drive unit is above Limits
The temperature in the AOM drive unit is above Limits
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Check or replace the AOM board
--
-----------------------------------------
Error number: ERR_0232
Error type: INFO
An error occurred in the AOM unit
The temperature in the AOM drive unit is above Limits
The temperature in the AOM drive unit is above Limits
Note down the error number and inform the service department
Check or replace the AOM board
--
-----------------------------------------
Error number: ERR_0233
Error type: ERROR
Internal error
Fpga file corrupt
--
Switch off the recorder and restart it. If the error still occurs,
note down the error number and notify the service department
Reformat device and/or install new software from filebox
--